6 Head Ultrasonic Mist Maker Fogger System Homemade Humidifier DIY

6 head ultrasonic mist maker fogger system Homemade Humidifier DIY

Overview of atomizer
1. The atomizing plate vibrates up and down at 1700khz to produce atomization effect
2. The atomizer will stop working automatically when the maximum temperature is 55 ± 3 ℃
3. The water column of atomizer represents the use of a capacitor. In the environment with good water quality, it is recommended to use the atomizer with steel water column. When the capacitance around the steel column is relatively high, it will automatically feel the operation. In the environment with more scale, the scale will be formed around the water column and the atomizer will not work. Steel float atomizer is recommended for water quality with more scale. The steel float is operated by upper and lower machinery, and can operate normally in the environment with more scale.
4. When the atomizer is separated from water, it is possible to burn out immediately, which belongs to dry burning.
5. The use of one atomizer will lead to a temperature rise of about 3 degrees, two pieces will rise to 4 degrees, three pieces will rise to 5 degrees, and the use of 20 atomizers at the same time needs to consider the problem of heat dissipation.

6 head ultrasonic mist maker fogger system Homemade Humidifier DIY

1.7mhz Ultrasonic Mist Maker Fogger

200W Ultrasonic Mist Maker Fogger

PZT-4 Ultrasonic Piezoelectric Transducer

6 Head Ultrasonic Mist Maker Fogger System Homemade Humidifier DIY Images